An Overview of Geothermal Heating and Cooling Systems

geothermal_installationPresently, most modern homes are installed with heating and cooling systems due to their ability to keep people comfortable despite the season of the year. For instance, during the summer, this system can be used to bring cool and fresh air into your house. And during winter seasons, this system can also be used to provide warmth in the house, thus keeping you warm. This is why is very essential to invest in the high quality systems which are installed by qualified and experienced professionals. However, if you want to minimize your carbon footprint as well as contributing to the preservation of the environment while still feeling comfortable, it is good to choose a high quality geothermal heating and cooling system.

If you decide to install a geothermal heating and cooling system, you will greatly benefit from it in several ways. These systems are suited for every type of a building, whether it is an office, a residential home, or even a commercial building. Because of their benefits, the geothermal type of system is rapidly growing in popularity. Unlike many years ago when this heating and cooling system was used as an alternative to various situations, but these days it is a leading and best option among many homeowners.

One of the most common and notable advantages of installing this system in your home is that it is affordable to many individuals. In addition, it is a better option than other types of systems in terms of economy. For instance, some types of heating and cooling systems use oil as their source of power, thus being expensive, particularly at the rates at which fuel prices in the market continue to rise globally.

How does a geothermal heating and cooling system work?

This system works in a simple mechanical way. A solution-filled water pipe is made and then put in the ground. This is basically to allow absorption of temperature from the ground through it. Water is then introduced into the heat exchanger to release heat towards a refrigerant in order to convert an eco-friendly gas from a liquid sent through this pipe. The gas then goes directly into a compressor to undergo the second exchange of heat, which is then released into the duct.

The design of this type of heating and cooling system plays an important role in conserving the utilization of energy and ensuring that environmental friendly procedures are properly followed and utilized in the process. The process of installation basically requires expertise and extensive knowledge to ensure that every component is placed properly and their good communication among the components in terms of working. Without a proper design and correct installation, it can be impossible to enjoy the benefits that this type of system promises to offer.

In addition to that, it is essential to determine the scope and size of the area, which the system will cover. Furthermore, the heat load needed for each room in your house must also be considered alongside the ground temperatures.

Types of geothermal heating and cooling systems

There are basically four types of these systems. Three of them are known as closed-loop systems and there is only one open-loop system. All these types of systems can be used in both commercial buildings and homes.

Basically, geothermal systems are not like conventional furnaces which burn fuel to produce heat, in their case; heat pumps get their source of power from electricity in order to move the geothermal heat from the ground to the homes or commercial buildings.

Different forms of geothermal heating and cooling systems

If you are planning to buy a geothermal system for your home, you must know that there are so many options that you can choose from in the market. However, before making your final decision to which type of geothermal system you wish to have in your home or business, it is important first to know and understand what these systems are all about. The primary concept why people use these systems is because they are cost effective, energy efficient and very much durable.

Since the whole world is affected by global warming, it is important to think of conserving as much as energy as you can. These systems are in fact different from the normal types of cooling and heating systems commonly used in the market.

Since there are so many choices to make a choice from, your selection is actually based on several different factors. These factors can be climate change, the soil condition, local expenditures and the availability of land area. You can simply start your from the section of horizontal loops that can only be selected by you especially if the surface of the land given to you is on the upper side.

When installing horizontal loop systems in your home, you don’t really need to spend huge amount of money, but since the land surface doesn’t favour you for these geothermal systems, it can be quite immense and can consume a lot of time in putting the looping system into the place. It is essential and recommendable to dig very deep trenches and to make the looping system, particularly those active acts as the most efficient geothermal system.

The vertical loop systems are the second form of geothermal heating and cooling systems. They are quite popular and highly dependable on the market. They are ideal for residential homes where a limited amount of space is available. In some cases, when laying these loops under your home, the depth of soil turns to be quite shallow and therefore these vertical loops are extremely perfect for such type of soils. In addition, the vertical looping system is good for in areas with landscapes. Normally, the lowest height of the holes basically for the digging purpose is supposed to be approximately 4 inches is all.

Last yet importantly, it is good to determine the total area or the size of the home where a vertical looping system is going to be fixed. In this regard, exactly two pipes are required. The two pipes are then directly linked with the existing holes for a smooth and free flowing of water supply.

In conclusion, since there are two main types of geothermal heating and cooling systems, the open-loop types of systems are commonly used by the majority and can be the best and ideal choice for you.